Detail
The ViraVent air separator units are installed to efficiently remove air and micro bubbles from the system. In heating systems, an air separator should be installed in the flow loop where the system experiences the highest temperature (next to the heat source) and lowest pressure. Air separators should ideally be installed immediately after the boiler and prior to the pump suction port as this is where the formation of micro bubbles is greatest. In a chilled water system the unit must be located in the return loop just prior to the chiller.
| Body | : Carbon Steel-ST 37 |
| Connections | : Flanged - Welded End |
| Max. Working Temperature | : 110 °C |
| Max. Working Pressure | : 10 bar |
| MicroSmart Screen | : Stainless Steel |
| Product Range : SV-K - Viravent Welded End SV-F - Viravent Flanged SV-V - Viravent Grooved |
